This year, Bengaluru recorded its second hottest summer day in 50 years, with temperatures touching 40°C in some parts. As a result, the demand for air conditioners (ACs) has skyrocketed. People have purchased multiple ACs without actually checking their sanctioned loads, this has put additional load on Bangalore Electricity Supply Company Limited (BESCOM) power.
According to news reports, close to 11 lakh consumers have been penalised by BESCOM for exceeding the sanctioned voltage.
Here is a two-part explainer series about how the BESCOM bill is structured and how to calculate the sanction load.
Components of an electricity bill
- Meter: Our electricity meter known as Energy Meter is identified by a specific nomenclature called the “RR No.” (Revenue Registration Number)’ found at the top/first line of the bill (like a vehicle registration number). It is an alpha-numeric code assigned to consumer installation.
- Tariff category: This is the category of “rate for connected load and consumption”, which determines charges applied to your meter.
- Sanctioned load (in yellow): This is the maximum power/load you can draw, hence it is called sanctioned load
- Recorded MD: Maximum demand or MD is the actual power drawn by a consumer
- Power factor (PF): This is a measure of how effectively incoming power is used in your electrical system (energy efficiency)
Read more: How renewable energy production can affect what you pay for power in Bengaluru
Tariff structure
- Fixed charges: This is the charge on the sanctioned load (3 KW, 5 KW as per the bill). This has to be paid every month, whether you consume any electricity or not, and they are based on your sanctioned load or capacity. The charges are usually in Rs/KW.
- Energy charges: This is the per unit rate (consumed as per meter reading)
- Tax: 9% (GST)
- FPPCA charges: Fuel and Power Purchase Cost Adjustment (variable-month on month)
Apart from these, there may be arrears or adjustments from previous months. If your consumption increases, you may be asked to pay an additional security deposit (ASD).
Additional charges
- PF Penalty
- MD Penalty
Sanction load
Sanction load refers to the maximum amount of electricity a consumer is authorised to draw from the grid. BESCOM determines the sanction load based on factors such as the size of the premises and anticipated energy consumption.
Generally, builders apply for 3 KW / 5 KW sanction load for a 2 and 3 BHK flat. However, newer high-rises, especially the premium condominiums, have sanction loads of up to 10 KW.
When we say 3 KW – we can draw a max of 13.05 Amps at any given time (1 KW is 4.35 Amps at 230 volts supply).
AC single phase
- Given power (kW) = 3 kW
- Voltage (V) = 230 volts (rms)
- Current (I)= 13.05 Amps
Read more: Explained: Did the Karnataka government really increase electricity rates by Rs 2.89 per unit?
KW and Ampere ratings for major equipments
| Item | BTU/KW rating | Amper draws at full load |
| 1 Ton AC | 12,000 BTU | 5.0 Amps |
| 1.5 Ton AC | 18,000 BTU | 7.5 Amps |
| 15 to 35 Litre geyser | 2 KW | 8.2 Amps |
| 6.5 Kg Top Loading W/m | 350 – 650 watts | 2.5-3.5 AMps |
| 6.5 Kg Front loading W/M | 650 – 800 watts | 3 – 3.5 Amps |
| 20 Litre Microwave | 0.8 KW (800 watts) | 3.25 Amps |
| 365 Litre fridge (3*) | 0.215 Kw (215 watts) | 0.93 Amps |
What can you run on a 3 KW sanction load?
- Air conditioner: Typically, a 1.5 ton AC unit consumes around 1.5 kW to 2 kW of power.
- Geyser: A 2000W geyser consumes 2 kW of power.
- Fridge: A typical fridge consumes around 100-400 watts of power, assuming your fridge consumes 200 watts or 0.2 kW.
- LED panel lights: LED panel lights typically consume around 10-50 watts each, depending on their brightness.
- Fans: Ceiling fans generally consume around 50-80 watts each.
At any given point, you can simultaneously run one AC of 1.5 ton, one fridge and 2-3 lights.
If you run an AC of 1.5 ton and a geyser of 20 litres, you will cross the allowable amperage (15.7 amps against 13.5 amps), leading to penalty.
In 2022, BESCOM began replacing mechanical electricity meters with digital/electronic meter, which can record MD, this has led to consumers blaming the new meters for higher bills.
Penalty for overshooting MD is 1.5 times the per unit rate.
(Part 2 will delve into electrical system maintenance)
By installing solar ongrid system we can generate 5 units per kw . So according to tariff we can considerably reduce our billing through nett metering system
Pl call me Rajan 9840411011 , 9843165200 , 8838165671
Very nicely explained sir. We are that much wiser now.
very succinctly explained..easy to understand and relate to bill..looking forward to more such items perplexing citizens…
Well explained.
What if owner has taken only 1 kw for a two BHK house. Tenants are penalized with heavy bills. Will government take action?
My MD is reached 5 value number .They are asking me to change the meter .Is it valid one ? If we go for new meter is it grantee even the new meter will not reach value to 5?Please suggest
“If your consumption increases, you may be asked to pay an additional security deposit (ASD).” More accurately, if your average bill value (Rupees) over the previous few months increases – whether due to consumption (kW) increase or due to tariff (Rupees per kW) increase – then BESCOM may ask for a higher, or Additional, Security Deposit (ASD). The meter reader staff should hand over to the consumer an ASD demand letter showing the computation.
In my Comment, please read ‘kWh’ in place of ‘kW’
When a child is born we get Birth certificate. When a person is dead we get death certificate.
So wise when a house is built we get Meter installed certificate. But, rare we get meter uninstall certificate when dead.
Government gets revenue by installing electricity meters. Why they should charge for name transfer is a mystery