How to get a good road in your neighbourhood

A local initiative led by an RTI activist in Koramangala shows how citizen’s participation in governance can ensure better roads and civic infrastructure in general.

“It is close to four years now and there has not been a single repair work of the road,” says Anil Kumar, but the RTI activist is not complaining! “It is strong, inspite of the many floods since 2008 when it was laid” says Kumar.

A conversation with Kumar makes it apparent that it is not just the roads themselves but the monitoring of the entire process that residents need to be aware of in order to ensure that a good road is laid.

In 1995, Ejipura was a new ward that lacked many basic civic amenities. A group of people from the locality decided to strategically work with the government to fulfil the infrastructural needs of a ‘new ward’. They took part in the participatory budgeting exercise organised by Janaagraha in 2001-02 that helped them draw up a plan for roads and other required civic amenities, and submitted the proposal to the Corporator. After negotiations, the Corporator made some budgetary allowance for laying of road in the area. That is not all that the group achieved – it merely marked the beginning of a road that would strictly match the desired standards.

Measuring drains with a measuring tape
Checking the measurements of the side drains is the first step. Pic: Shamala Kittane

What is a good road ?

You don’t have to be a civil engineer to know that. However you need to familiarise yourself with a few things to be able to tell if the road that is being laid in front of your house is going to last as long as roads normally should – which is a minimum of five years.

Urban roads are of 5 kinds (see box) and speaking strictly of local roads, we can say that the following should help you gauge the quality of the road for yourself:

  • Simple monitoring steps formulated from the RTI filed by Anil Kumar and the experience of the small group of people in the neighbourhood where a new road was to be laid
  • The “Guidelines for construction and maintenance of roads” brought out by the BBMP and compiled by K.N. Shivashankara Rao, retired Chief Engineer, Public Works Department. The engineers in charge of the road construction work should have a copy of this book.
  • An RTI requesting the work order of the road – with laying schedules and supporting documents such as the civil engineering drawings of the road.
  • An alternative to procuring the work order document through an RTI is looking for the tender details on BBMP’s website. If you get the tender number of the public utility works to be implemented in your area you can look for the details here. The document mostly covers the cost details and project agreement details but Sections 6 (Specifications), section 7 (Drawings) and section 8 (Bill of Quantities) may be useful. Engineering Drawings are made available on the site but the resolution of these make it rather useless (one might just get an idea of the construction but the specs are not clear from the pictures of the drawings posted on the website)

With access to the above information, you could yourself ensure that your tax money is being spent justifiably on a ‘quality’ road in your ward.

In the Ejipura example, the monitoring was done under the guidance of Dr. C.E.G Justo (Prof. Civil Engineering, (Retd.), Bangalore University).

The first step in laying a new road is to ensure that all that goes below the road is carefully planned for – the water pipes, sewage and stormwater drains, manholes.

“The drain for laying water pipes by BWSSB needs to be 3 feet as per the work order document., we measured it to be 2.5 feet and brought it to the notice of the engineer who then ordered digging as per standards specified in the work order document. The first step to laying the road was completed only then. The depth of the culvert needs to be checked, as otherwise the engineer could try to make a profit on the labour cost for digging work,” says Kumar.

Once the actual laying of the road begins, there are three important checks to be made.

Check 1: Ensure that the first layer of stones are not more than 15 cm apart (density). They have to be dense and must cover the surface of the path well. The roller has to run over this layer five times.

Pictures of stone gravel before and after compression
Density of the first layer of stones is important. Pic: Anil Kumar

Check 2: The second layer (the thickness of this will be specified in your work order document, it is normally 10 cm or 20 cm) is called the wet mix (technical name: “Wet Mix Macadam (WMM)”) and this needs to be a mix of jelly, quarry dust and cement. Usually the contractors only spread a layer of jelly stones as the second layer. WMM compaction needs to be done using a roller at a speed of not more than 5 km/hour. Rolling has to proceed from lower edge towards upper edge and parallel to the centre line of the road. The next layer can be placed above this after a minimum of 24 hours. No traffic movement should be allowed in this time.

Check 3: Asphalting – This is the final layer of bitumen and needs to be only 5 cm thick. Traffic may now be allowed.

Anil Kumar has even devised a gauge to check the thickness of the materials laid. It is simple, rugged and useful.

A rod used for measurement
The easy-to-make gauge that can measure the depth of the road. Pic:Shamala Kittane

“Normally road cutting is done within half a day. But it took two days for a recent road cutting work to be finished. That’s how strong our road is” Kumar proudly claims.

Urban roads are classified into five categories according to the Tender Sure (Specifications for Urban Roads Execution) document 2011:

1) Arterial : These are high trip density corridors like the ring roads that would connect the business hubs to residential areas. Roads connecting National Highways, State Highways also fall under this category.

2) Sub arterial Roads: relatively lower density of traffic.

3) Collector Roads: They aggregate traffic from local road networks within residential neighbourhoods, commercial roads, and industrial areas and link this to sub arterial and arterial roads. High volumes of traffic.

4) Local Roads: These form the access networks for individual dwellings and residential developments. Majority of trips in urban areas originate from and terminate here. Such roads must allow for streamlined parking and safe and comfortable cyclist and pedestrian movement. Heavy traffic and commercial traffic must be restricted on these roads with adequate traffic calming measures designed for each street and intersection.

5) Sub-local streets / Access streets (conservancies): In some of Bangalore’s older neighbourhoods such as Chamrajpet, Basavanagudi and Malleshwaram narrow lanes were reserved as conservancies and used for utilities such as drainage, sewage and in the recent past for electrical poles and transformers. Over time these are being used as access roads for parts of properties facing the conservancies.

The Tender SURE specifications

The Directorate Or Urban Transport, Bangalore City Connect Foundation, a platform to solve city issues, and India Urban Space Foundation have published Tender SURE, a planning and design standards for urban roads. The specification also includes processes related to procurement and execution. The document is available on the India Urban Space Foundation website.

Tender SURE specifications are used for construction of new arterial and sub arterial roads. For local roads resurfacing works for local roads, BBMP refers to the guidelines book.

Screenshot from Tendersure manual
Specifications from the Tendersure manual: Design for 8m and 9m local roads.

The Tender SURE document is inclusive and looks at urban roads as “the stage where the tableau of urban society can share space equitably – pedestrians, cyclists, hawkers, buses, motorists”. The recommended design is based on City Connect’s experience in designing Vittal Mallya Road and Walton Road in Bangalore, says V Ravichandar of City Connect.

Tender SURE currently is not planned as a citizen monitored road. Ravichandar however says, “we would love it if that can be enabled. What we have pushed for is an independent third party professional audit as part of the project.”. B. T. Ramesh, Chief Engineer (Roads), BBMP concurs.

The recent state budget has allotted 200 crores (maybe revised to 310 crores to include BWSSB works) of Tender SURE roads. And five roads in Metro Reach-1 between MG Road and Byappanahalli will use the Tender Sure standards.” according to Ravichandar and that puts 50 roads (arterial and subarterial) on the Tender SURE list.


The coming together of the neighbourhood to participate in the monitoring activity of the road construction led to the formation of an active representative group that regularly interacted with the corporator and other government agencies. This had other benefits as well.

Some neglected areas lacked properly metalled roads, drains, foot-paths, water supply & underground drainage; these areas were provided for by the efforts of the group.Grape garden, Anjaneyappa garden, Kuttiappa garden, Sundari memorial school area, Gundappa Gowda block,Venkatappa garden,Muneshwara block, Ashwini Layout,Venugopalasawamy Layout, Nadugatta,Jakkasandra and S.T. bed layout saw improvement.

The PROOF (Public Record of Operations & Finances) campaign that involved scrutiny of BBMP budgetary allocations and expenditure was started during 2002-03; this was used to analyse the BBMP budget and give inputs to BBMP every quarter. Later on, it became a half-yearly review, but was eventually discontinued due to the objections from Corporators as well as officials of BBMP to the campaign.

The group also Initiated monthly review meetings between residents and officials from various departments such as BWSSB, BESCOM, BMTC and the Police. This cumulative effort helped in timely resolution of issues within the ward.

Tender SURE design for Local road of 8m (which is the case presented above) to include Travel line (tl) and footpaths on either side

As a result of the regular interaction in 2003, a document detailing issues concerning various departments like BWSSB, BESCOM, BMTC, POLICE was compiled as a part of the ‘ward vision’ exercise. Some of the issues covered in this vision document were: door to door garbage collection system, proper channels for storm/rainwater and sewage water, installation of distribution transformers to avoid low voltage, increase in frequency of BMTC buses from Ejipura and Koramangala to different destinations.

Kumar informed Citizen Matters that this was brought to the notice of the then Mayor P.R. Ramesh who did not take any action on the ward vision documents presented by 10 wards. However, they followed up with individual departments and were successful in accomplishing the objective of making Ejipura as one of the well developed wards.

“This is ideally how Ward Committees should work. They should work alongside BBMP to draw up long-term plans (5-year period) for every ward addressing the need for various civic amenities & infrastructure like roads, storm water drains, underground drains, water supply, rain water harvesting, traffic management etc. These can be finalised by the BBMP in consultation with all stakeholders,” Kumar points out. An approach of this sort works best rather than filing complaints against executed plans which we did not bother becoming a part of.

Kumar himself has taken away several interesting learnings from his experience of working with the government.Through this exercise, he learnt the importance of being aware of the powers and functions of MPs, MLAs, Ministers, corporators and the officials of the corporators; knowing all of this could save one a lot of effort and time.

Interestingly, he cautions “Spouses of the Corporator should be kept out. Resident committees should refuse to recognize them or deal with spouses of the corporator. They are unelected and unaccountable, and could be a source of great mischief.”

According to Kumar, “Our attempts at Participatory governance did not bring unalloyed success and produced only mixed results. However our experience holds many useful lessons.” And of course, a very well done job on a road!


  1. shridhar bawale says:


  2. M.Dinakaran says:

    The spacing between stones shown for the bottom layer as 15 cm is incorrect. The road will sink as a whole bringing down the upper layers. May be it is to tell the reader what BBMP is doing presently.But the actual requirement is different . If needed , if the requirement is indicated the specifications can be provided.

  3. shridhar bawale says:

    You should publish the correct specification, if the writer has mentioned wrongly. All the readers/citizens should have the knowledge the road specifications since they pay for Road Tax 6 times by way of various means by the govt. We are liable to get good roads not only in highways but in city level too.

  4. Pradeep Singh Rawat says:

    Hi Shamala,

    Could u pls help me to contact RTI activist Anil ?
    I want to get more info from him on Ward committee/ward Sabha meetings.

    I think this should be implemented for each ward. Citizens need to push for it.

    Pls provide his contact.


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Similar Story

Taking flight: Does Chennai need a second airport and at what cost?

Civic and environmental activists question the feasibility of the greenfield airport in Parandur and suggest expansion of Chennai airport.

Ten lakes, two streams, 3,500 acres of agricultural land, 1,005 families and hundreds of plant and animal species — these are all under threat because of one development project. There has been a considerable buzz regarding the Chennai Greenfield Airport set to come up in Parandur on the outskirts of the city. But, not all the noise is positive. Villagers in Parandur have been protesting for almost 700 days and some have even boycotted the Lok Sabha 2024 elections, asking the government to withdraw the project.   Yet, work is steadily progressing on the greenfield airport and the government is…

Similar Story

Explainer: Electrical components and ways to increase BESCOM sanctioned load

Here is an explainer on electrical system components and its maintenance, how to calculate sanction load and the process to increase it.

(Part 1 covered the components of BESCOM bill, tariff structure and sanction loads. Part 2 delves into electrical system maintenance) With the adoption of electric vehicles, owners are tapping into their existing meters to charge their vehicles, leading to electrical mishaps. If you need to connect a 3.3 kw/7.2kw EV charger, your sanctioned load needs to be enhanced. This leads to cable/wire, MCB (miniature circuit breaker) and RCCB (residual current circuit breaker) replacement, possibly the energy meter too may need to be replaced.  Overall, if every household enhances sanction load, this leads to constant tripping of the transformer and short…