Plastic producers vow to help enforce ban on plastic below 40 microns

It was a tug of war between BBMP and plastic manufacturers. While the latter didn’t want to take responsibility for the plastics’ problem, BBMP says they have to share the burden of managing the plastic waste.

Bruhat Bengaluru Mahanagara Palike (BBMP) made it clear to the plastic manufacturers in the city that they have to go by the Plastic Waste (Management and Handling) Rules, 2011, that bans plastic below 40 microns. Producers seem to agree, however they think enforcing the rule by the BBMP is the biggest problem.

BBMP Joint Commissioner for Health Yatish Kumar instructed the plastic manufacturers to provide details of the quantity of plastic they are generating, so that they can provide BBMP some percentage of their turnover to manage the waste, as part of Extended Producer Responsibility.

The meeting between BBMP Health Department officials and plastic manufacturers on December 12th, Friday, in IPP Centre, Malleswaram, was a direct response to the Supreme Court’s direction to BBMP. Hearing the writ petition filed by Karuna Society for Animals and Nature on Thursday, the SC asked BBMP and other local governments why they were not enforcing the Plastic Waste (Management and Handling) Rules, 2011. The Supreme court has handed over the case to the newly formed Social Justice Bench.

Why is BBMP talking to plastic manufacturers?

The Supreme Court summoned officials from Bangalore responsible for plastic management, while hearing the PIL (WC 154/2012) filed by Karuna Society for Animals and Nature, after they recovered 70 kgs of plastic from a dead cow’s stomach in a surgery.

T K Anil Kumar, IAS, Secretary, Urban Development Department, Government of Karnataka, and KC Yathish Kumar, Joint Commissioner, SWM, BBMP, Bangalore, attended the hearing that took place in Supreme Court on December 10, 2014. The Supreme Court instructed them to implement the Plastic Waste (Management and Handling) Rules, 2011.

The Rule specifies that “No person shall manufacture, stock, distribute or sell any carry bag made of virgin or recycled or compostable plastic, which is less than 40 microns in thickness.” Another term states that “No carry bags will be made available free of cost to the consumers by the retailers. The concerned municipal authority may determine the minimum price of the carry bags.”

The rules put the onus of handling and managing plastic waste exclusively on Municipalities. However, they also talk about Extended Producers’ Responsibility, where the manufacturers of carry bags and brands that use such carry bags are held accountable partly for the safe disposal of plastic.

The rule says that “For setting up plastic waste collection centres, the municipal authority may ask manufactures, either collectively or individually in line with the principle of Extended Producer’s Responsibility (EPR) to provide the required finance to establish such collection centre.”

The Rule came into effect in Bengaluru in March 2011. Three-and-a-half-years later, the city’s garbage dumps are still full of plastic below 40 micron. BBMP is conducting raids now and then, on retailers and manufacturers who sell plastic carry bags below 40 micron. However the magnitude of the problem is huge for BBMP to tackle. without self-regulation by the manufacturers.

While most manufacturers seem to be okay with helping BBMP in tackling the problem, BBMP seems to be keen on collecting the data related to production and turnover, which may or may not solve the problem, unless the system of garbage collection and disposal falls in line.

The Friday’s meeting was called by the BBMP to discuss Extended Producers Responsibility, however no formal agreement was reached except that BBMP asked them to provide data.

Manufacturers support the 2011 rule

Plastic manufacturers and association representatives who were present in the meeting unanimously supported BBMP’s resolve to enforce the existing ban on carry bags below 40 micron strictly.

Vijayakumar, President of Karnataka Plastic Manufacturers Association, said that extended producers’ responsibility (EPR) lies also with the departmental stores who purchase the plastic below 40 micron. He recalled the demonstration of a plastic-grinding machine two years ago by Plastic Manufacturers’ Association in Freedom Park, when Siddaiah was the commissioner and Jagadish Shettar was the chief minister.

Why not plastic below 40 micron?

  • Plastic of less thickness is difficult to collect and store separately. This is not considered economic, as this is usually distributed free in retail stores and has no value.
  • In Bengaluru, such plastic is used mostly for garbage packing. This is most unhealthy practice, as the plastic is not biodegradable, but has biodegradable material, which ultimately leads to rotting of the garbage inside and developing of pathogens, as days pass. This prevents scientific disposal of waste.
  • Lightweight plastic can fly and move around, can choke the drains, trap birds and kill livestock.

The plan was to compress the segregated plastic in the machine, which would later be purchased by plastic recyclers. However, Vijayakumar said, no ward-level officers from BBMP came forward to install this machine that needed just a 6X6 feet space in every ward and cost around Rs 3 lakh. Several letters were written to everyone from the chief minister onward, but nothing moved forward, he rued, complaining that the plastic manufacturers were ready to support this initiative with free machines for demonstration.

He stressed that the plastic manufacturers still stand by this proposal. Vijaykumar said that plastic carry bags thinner than 40 micron are hidden under flower or vegetables in the transport vehicle and come to KR  Market, from where they are dispatched to various other places. An early morning visit to KR Market area will reveal all this, he added.

Another plastic manufacturer, Chandra Mohan agreed that there were blacksheeps, however, and exposing them could attract threats to life. He added that he had faced such situations in the past.

Rules meant only for carry bags

While contending that controlling manufacturing and sale of plastic carry bags below 40 microns is easy if the plastic waste handling rules are implemented by the BBMP, the manufacturers did not seem keen to flag the BBMP about the persons manufacturing such plastic.

Some manufacturers seemed upset that BBMP raids were completely out of the blue. They expressed their anguish by saying that some officials storm into the office without even removing their footwears.

When BBMP officials said all the manufacturers have to give a written submission that no plastic below 40 microns is manufactured in their unit, after which the BBMP will not raid them without notice, all manufacturers jumped at the offer.

The plastic manufacturers were also seen discussing among themselves whether the rule applies only to carry bags or all plastic below 40 microns. Some claimed that it is only carry bags, while other products such as industrial packaging material and table rolls which are also below 40 microns are allowed to be manufactured upon order by the consumer companies.

‘Plastic below 40 micron recyclable’

Vijayakumar pointed out that PVC flex sheets used in the city for hoardings and banners are not recyclable; They come to India from China as they are banned in China due to the dioxin emitted by them. They do more harm than plastic below 40 micron, he argued. Plastic manufacturers also showed the carry bag prepared from non-woven fabric, and said it was not biodegradable as the material used was synthetic. They claimed this would cause more damage than plastic below 40 microns.

Yet another manufacturer pointed that it is not environment-friendly to use paper bags, as papers require tree-cutting. He urged the BBMP to implement the Solid Waste Management rules 2011 with respect to carry bags.

Mahantesh, the President of Peenya Plastic Manufacturers’ Association, said that it was possible to recycle the plastic below 40 microns. He was supported by all other manufacturers. They said some of the plastic below 40 micron contains 80% of calcium and 20% of polyethylene.

Secret behind plastic carry bags below 40 micron

A plastic manufacturer who did not want to be named, runs many carry bag-producing units at the heart of the city. He claims that everything is not as rosy as BBMP claims it to be. According to him,

  • The BBMP officials regularly raid the plastic manufacturing units, and take away all types of plastic—plastic cups, plates and all other types of items, not just carry bags.
  • Nobody knows what happens to the seized plastic, most of the times.
  • The owners of many such units have an unwritten agreement with the raiding officials, where some bribe exchanges hands, and raids and cases go unrecorded by the officials.

This particular manufacturer feels that unless the BBMP officials become honest and commit themselves to the cause, the production of plastic carry bags below 40 micron will continue.

Ashwath Narayana Rao, Secretary of Peenya Plastic Manufacturers’ Association, appealed the BBMP to spread awareness about segregation at source, so that they can collect the used plastic of all grades. Every plastic is recyclable and has its own use, he added. One of the uses that was suggested was to add it in the asphalt mix for roads.

Savitha, Senior Health Officer of BBMP East Zone, seemingly irked by the plastic manufacturers’ suggestion on raids and strict implementation, clarified that the meeting was about discussing Extended Producers’ Responsibility of plastic manufacturers and getting the required data. Manufacturers need to provide the data on the quantity and grade of plastic produced and cooperate with the government on implementation, said Yatish Kumar.

Yatish Kumar asked the plastic manufacturers to provide the list of all manufacturing units operating in Bengaluru city and the list of recyclers. He appealed them to alert him about units that produce plastic below 40 microns.

Vijaykumar argued that EPR also includes the purchaser of the product who buys the carry bags from plastic manufacturers. The BBMP panel present in the meeting heard all suggestions and took note. The meeting dispersed after all the manufacturers were provided a format to fill in the quantity of plastic of all grades produced.

Later in a conversation with Citizen Matters, Yatish Kumar said that world over thin plastic (of low micron) is banned, and implementing the Plastic Waste (Management and Handling) Rules, 2011 was the only way out to manage plastic properly.

Related Articles

JP Nagar residents take on plastic ban with cloth bags
Yes or no to plastic bags?
LB Shastri Nagar residents abandon plastic bags
Bengaluru citizens take up no-plastic bag challenge
BBMP wakes up, plastic carry bag ban from today
Sanjay Nagar shopkeepers stop giving plastic carry bags, launch ‘Rent a Bag’

Comments:

  1. skeptic says:

    Very simple – lets use that ill-gotten money from charging 4 rupees for a 10 paisa plastic bag to provide free 80 micron bags – fibre-glass reinforced to all the shops. All the plastic will be put to good use one way or another and never thrown away. And what better time than now – with oil prices lower than ever, that surplus collected since the ‘ban’ can be put to good use. New law – all plastics manufacturers to provide free reinforced-plastic bags to all or face ban on manufacturing activities. And BBMP officials? Send them to USA, for, no, to train the good people to loot the public better.

  2. Vasanthkumar Mysoremath says:

    We use non-biodegradable polythene carry bags without control because they are free and are ‘use and throw’ articles. Irresponsible littering of plastic is choking our earth and earth cannot breathe freely. Plastic is harmful to human beings and animals and the toxins released are contaminating the soil and ground water and making them unfit for use.
    Old habits die hard and plastic has become inseparable for urbanites because it is free and is a convenient – use and throw – product. So, let us become practical – Refuse, Reduce, Recycle and finally, Return – these are the golden 4 Rs to fight proliferation of plastic. With this in view, some suggestions are made as below:

    Statistics: Malls/Departmental stores are releasing billions of plastic pieces every day. Sample this: Every day in a city with 100 departmental stores, if 2000 customers buy plastic packed 50 items of food and other articles of daily use, those people will be releasing 100 X 2000 X 50 = 10,00,0000 plastic pieces into our environment; thus, in a year from one city alone, 36,50,00,000 plastic pieces will be released. If there are 100,000 Stores in one country… ?? our children will be literally swimming in plastic and there will be more plastic visible than earth.

    Here are a few ideas to arrest proliferation and circulation of plastic being released by citizens:

    Idea No.1: Plastic Roads: With the help of rag pickers/municipal workers, collect as many plastic from streets/dumps etc., establish a medium scale industry that can melt it to a particular temperature so that it can become a blender for a mixture of bitumen, sand and fly ash and is ready to be spread on roads that have been cleaned from dust etc. Such plastic roads last for about 6-7 years with minimum maintenance whereas, the regular tar mixed roads do not last more than 2-3 years. Economics have been worked out, electricity consumption has been taken into account and has been found to be doable, replicable and sustainable environmental friendly method of arresting plastic circulation from our environment.

    In Bangalore, India, experimental roads have been conducted, examined by civil engineers and university authorities and have been found to be more sustainable, economical and replicable solution.

    Idea No.2: Collect plastic/polythene carry bags, cut them into large square/rectangle pieces, spread them on the floor to match a bed sheet say 4 feet by 6 feet, attach each piece with a bit of sticker tape or a single stitch with thread so that they do not move. In this manner, if one can spread about 5,000 to 10,000 carry bags and put stitches with needle and thread, put some knots here and there to see that all the pieces are held together. Fold the sides and put a running stitch. Make a few holes here and there so that air circulation can be maintained. Take two cotton bedsheets, stitch on three sides and insert our plastic bed sheet inside and close the side that is open with buttons – this way we can arrest more than 40,000 non-bio degradable plastic that is circulating in our environment almost on a permanent basis. This bed sheet/quilt is as good as any other quilt we use.

    Idea No.2: In the same manner, we can create a soft pillow also by stuffing shredded plastic bags and arrest circulation of about 3000 to 5000 carry bags.

    Idea no.3: Similarly, stuff your old toys like teddy bear etc., with shredded plastic pieces and stitch the hole. it will make a soft toy for the kids. If old toys are not available, then stitch a cotton teddy bear design, stuff the plastic and have a new toy.

    Idea No.4: Old balls like football, volleyball, cricket balls are discarded as garbage. Instead, stuff those balls with shredded plastic and arrest any number of plastic from circulation in our midst. Do not worry if the balls do not bounce, just kick them around and play. What we are taking about is to stop circulation of plastic and not to play olympics.

    Idea No.5: Use your own cotton or jute bags while shopping. otherwise, use the plastic carry bag again and again till it is really useless. Fold the carry bag into a small bundle, put a rubber band and put that neat little piece in your purpose or in the dicky/dashboard of your vehicles. use them again and again – Tell the shop keeper not to put your things in new plastic carry bags and give him your little bundle to pack your things. If you consider these ideas and the products as cheap, then for you to use, then make the products in your spare time and give them as gifts to the poor and downtrodden people who sleep on the floors in railway stations/bus stations and under the flyovers, during nights in shivering weather. They will bless you for the gift.

    Vasanthkumar Mysoremath
    Mysore-City of Heritage Palaces,
    India

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Similar Story

Flooded lands, disappearing birds: Pallikaranai wetland tour highlights impact of shrinking lakes

A vital wetland, Pallikaranai has shrunk drastically due to urbanisation, threatening biodiversity and vulnerable communities in Chennai.

Many of us who have lived in Chennai for years have probably crossed Pallikaranai Marshland at least once. Yet, we often overlook that we are passing through an area that was once ecologically rich and a haven for diverse species. But the marshland, one of the few coastal aquatic habitats in India to qualify as a wetland, is now just a shadow of its former self. Unchecked encroachments and rampant urbanisation have drastically reduced the catchment area of Pallikaranai Marsh. With the Northeast monsoon bringing rains to Chennai, residents are increasingly concerned about flooding. Experts point out that rejuvenating the…

Similar Story

Garudachar palya: The “hot spot” in Whitefield’s IT Hub

Examining the heat island effect in densely built-up Garudachar Palya ward in Whitefield’s IT Hub, which also has limited tree cover.

Garudachar Palya is part of Mahadevapura constituency, with an area of 6.5 sq km, which includes four revenue villages — Garudachar Palya, Hoodi, Seegehalli, and Nallurahalli. These villages have stayed mostly the same, while the city has expanded around them with more organised development from the BDA. This mismatch has led to issues like narrow village lanes becoming crowded with traffic, as they’re now used as shortcuts to bypass main roads. Looking at population growth, between 2011 and 2024, the ward has seen an estimated increase of 62.24%. This rapid growth adds to the existing strain on infrastructure. Ward no…